Bryant T6-PRH Manuale delle Istruzioni Pagina 50
- Pagina / 76
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
50
Humidify and Dehumidify Indicators
When the Display Module door is closed, the humidify icon will be displayed
when humidification is active and the dehumidify icon will be displayed when
dehumidification is active.
Auto Changeover
When auto changeover mode is selected, a change from heat to cool (or vice
versa) will not occur until an opposite mode demand has existed for 20 minutes.
If setpoint is changed, 20 --minute requirement is deleted.
When the W is energized in a heat pump or Hybrid Heat system, the “auxiliary
heat on” icon will be displayed.
Emergency Heat Mode
When Thermidistat Control is configured as a heat pump and emergency heat is
selected, all Y signals are locked out, and W becomes energized upon a call for
heat.
Programmable Fan (programmable models only)
The fan output can be programmed based on period of the day. When
programming for each day and period the fan can be set to On or AUTO.
Dry Co ntact
On the programmable models, the dry contact that can be used for control of an
auxiliary device. The dry contact may be configured to be closed for a specific
number of minutes per hour for each period of the program schedule. This can
be used to operate a ventilator, damper, system blower, or other auxiliary device.
There are two terminals, D1 and D2.
On both the programmable and non--programmable models, when configured as
a dehumidify output, it will operate cooling equipment capable of dehumidify
function. When configured for dehumidification, the Rc terminal must be
- Installation Instructions 1
- TABLE OF CONTENTS 2
- SAFETY CONSIDERATIONS 2
- INTRODUCTION 3
- INSTALLATION CONSIDERATIONS 3
- Outdoor Temperature Sensor 5
- INSTALLATION 7
- Install Thermidistat Control 8
- Two--Piece Installation 10
- Fig. 11 -- Standoff 16
- Single--Piece Installation 18
- Adjustment 30
- SYSTEM START--UP AND CHECKOUT 37
- Final Settings 38
- SCHEDULE HEAT COOL 39
- Wake 6:00 AM 68_F 78_F 39
- Day 8:00 AM 60_F 85_F 39
- Evening 5:00 PM 68_F 78_F 39
- Sleep 10:00 PM 60_F 82_F 39
- Humidity Control Features 40
- Humidification 40
- Dehumidification 42
- OPERAT IONAL INFORMATION 48
- Equipment On Indicators 49
- TROUBLESHOOTING 52
- WIRING DIAGRAMS 55
- Air Conditioner 73
Prodotti e manuali riguardandi Termostati Bryant T6-PRH
Termostati Bryant TSTAT Manuale Utente
(2 pagine)
(2 pagine)
Termostati Bryant TSTAT Manuale Utente
(2 pagine)
(2 pagine)
Termostati Bryant T6-PRH-A li Manuale Utente
(6 pagine)
(6 pagine)
Termostati Bryant 664B Manuale Utente
(4 pagine)
(4 pagine)
Termostati Bryant T2-NHP Manuale Utente
(2 pagine)
(2 pagine)
AEG X89464BV01 manuales
Manuales del propietario y guías del usuario para No AEG X89464BV01.
Ofrecemos 1 manuales en pdf AEG X89464BV01 para descargar gratis por tipos de documentos: Hoja informativa
Commenti su questo manuale